Wired electromagnetic probes are optional and can be used with intelligent hosts, a variety of hosts are available.
Wired electromagnetic probe use will not need to pull MN measurement line, directly using the wired electromagnetic probe signal input, ADMT series wired electromagnetic probe has several specifications products, frequency range 0.001HZ to 30KHZ, measurement depth is not limited, the frequency range is not the same its length and weight is not the same, the sensor accuracy is not the same.
The wireless sensor probe is an optional accessory.
When the wireless sensor probe is connect with the device mainframe, there is no need to pull the MN measuring line, and the electromagnetic wireless sensor signal input is directly used.
The ADMT series of wireless sensors probe have multiple specifications, the frequency range is 0.001HZ to 30KHZ,
and the measurement depth is 0-3000m,the frequency range is different,
the length and weight are different, and the sensor accuracy is different, so the depth of the measurement is also different.
ADMT-C1H No depth limit, recommended depth <400m
ADMT-C3 No depth limit, recommended depth <800m
ADMT-C5 No depth limit, recommended depth <3000m
Forty-seven years of independent research and development
16 channels of simultaneous input measurements, 5 minutes to wire
16 channels of simultaneous input measurements